11

K901

Control handwheel with seat for gravity indicator

SOLID CONTROL HANDWHEEL WITH INDICATOR SEAT AND LOCKING KNOB

Ver. 11V01-0124

Reinforced and stabilized polyamide.
Resistant to oils and greases.

Satin.

  • Technical features

    Materials:
    Reinforced and stabilized polyamide.
    Resistant to oils and greases.

    Surface finish:
    Satin.

    Colour:
    Black (RAL 9011).

    Insert:
    Galvanised steel insert with smooth through bore (tolerance H10).

    Mountable indicator:
    Use gravity position indicators models K650 or K660. The indicator can be only used in a vertical position (horizontal machine axis). The indicator and the corresponding grub screw d7 must be purchased separately. For further information on the indicators see the pages of articles K650 and K660 [pageFAM_K650-Codiceand pageFAM_K660-Codice.
    (*) With adapter KS08050.T01 you can mount the indicator K650050.

    Locking handwheel:
    Cylindrical handwheel G793-36 with threaded stud [pageFAM_G793. Black (RAL 9011). ATTENTION: dimension Q2 of the locking handwheel must be chosen by the customer based on the dimensions of the machinery on which the handwheel is applied. For model K901-130 the locking handwheel is replaced by the wing nut L751-32 [pageFAM_L751-Codice.

    Fixing method:
    For fixing systems, or execution of keyways or square holes, please refer to the technical notes attached to the catalogue [pageFAM_NT10-Codice.

    Special Requests:
    Upon request and for a minimum of 50 pieces inserts can be supplied with hole d1 with tolerance H7 and black oxide treated finish. Add letters ZB to the standard code. Example: K901100.T050D1001PZB.
    Upon request and for special quantities inserts can be supplied with custom hole diameter d1.
    Upon request and for special quantities inserts can be supplied in different materials/with different coatings.
    The indicator must be ordered separately.
    Upon request and for special quantities it is possible to change the indicator seat.

    Combinations Diameters/Indicators:
    d5=50 --> K650050
    d5=80 --> K650080 or K660080

  • Accessories

Alternative products
Codice art. D H d d2 M C C1 d3 d4 d5 d6 d7 h h3 h4 h5 h6 R d8 Dm d1 Q
K901130.0001 K901130.T080P6.801P 129 64.5 42 100 27.5 23 14 29 85.7 80* 90 M6 34 10 13.5 12.5 5 54 M8 20 6.8 24 370
K901150.0001 K901150.T080P6.801P 149 69 42 101 31 25.5 12.5 29 85.7 80* 106 M6 37 9 13.5 12.5 6.5 57 M8 20 6.8 28 470
K901175.0001 K901175.T080P6.801P 175 72 40 115 28.5 32 11.5 25 85.7 80* 126.5 M6 38 10 12.5 14 8 60 M8 20 6.8 28 690
K901200.0001 K901200.T080P6.801P 199 71 46 137 24 32 15 29 85,7 80* 144 M6 34 11 13.5 12.5 10 74 M8 22 6.8 23 850

Attention: For a minimum of 50 pieces the diameter d1 can be customised (hole tolerance H10 galvanised and H7 black-oxide treated).
Dm = Maximum obtainable diameter for subsequent machining (widening).
Q2 = Upon request.
dv = 36 mm. (K901130 dv=32 mm)

Request informations

Contact Form

Find our nearest distributor

Click here