d

D206

Two spoke handwheels

TWO-SPOKE CONTROL HANDWHEEL WITH REVOLVING HANDLE

Ver. DUK.15-0619

Reinforced and stabilized polyamide.
Resistant to oils and greases.

Satin.

  • Technical features

    Materials:
    Reinforced and stabilized polyamide.
    Resistant to oils and greases.

    Surface finish:
    Satin.

    Colour:
    Black (RAL 9011).

    Central cap:
    Grey polyamide (RAL 7035 code 13).

    Alternative cap colours:
    Orange (RAL 2004 cod. 02).
    Blue (RAL 5015 cod. 07).
    Yellow (RAL 1021 cod. 10).
    Red (RAL 3000 cod. 16).
    Green (RAL 6024 cod. 17).
    Black ( RAL 9011 cod. 01).

    Main insert:
    Galvanised steel insert with smooth through bore (tolerance H10).

    Lateral insert:
    Brass insert with threaded through hole.

    Lateral handle:
    Revolving handle art. M144 [pageFAM_M144-Codice.

    Hub:
    Solid Hub.
    (*) Lightweight hub.

    Fixing method:
    For fixing systems, or execution of keyways or square holes, please refer to the technical notes attached to the catalogue [pageFAM_NT10-Codice.

    Special requests:
    Upon request and for a minimum of 50 pieces inserts can be supplied with hole d1 with tolerance H7 and black oxide treated finish. Add letters ZB to the standard code. Example: D206130.TD1001PZB.
    Upon request and for special quantities inserts can be supplied with custom hole diameter d1.
    Upon request and for special quantities inserts can be supplied in different materials/with different coatings.
    Upon request and for special quantities spoke handwheels, handles and caps are available in the colours indicated in the chart (reduced range) [pageTitoloTabellaColori.

  • Certifications

  • Material sheets

Alternative products
Art. D H h d m c h2 h3 d3 dl L Dm d1 H10 Q 3D
D206080.TP0501P 80 34 26 24.5 16 18 20 6 16 20 56 12 05 20 125
D206080.TD0801P 80 34 26 24.5 16 18 20 6 16 20 56 12 08 20 122
D206080.TD1001P 80 34 26 24.5 16 18 20 6 16 20 56 12 10 20 119
D206100.TP0501P 99 43 33 28 20 23 26.5 9 16 20 56 16 05 24 182
D206100.TD0801P 99 43 33 28 20 23 26.5 9 16 20 56 16 08 24 182
D206100.TD1001P 99 43 33 28 20 23 26.5 9 16 20 56 16 10 24 179
D206100.TD1201P 99 43 33 28 20 23 26.5 9 16 20 56 16 12 24 177
D206130.TD0501P 129 50 36 32 21 29 32 12 26 21 65 18 05 24 296
D206130.TD0801P 129 50 36 32 21 29 32 12 26 21 65 18 08 24 293
D206130.TD1001P 129 50 36 32 21 29 32 12 26 21 65 18 10 24 291
D206130.TD1201P 129 50 36 32 21 29 32 12 26 21 65 18 12 24 289
D206160.TD0801P 159 57 40.5 40 22 35 34 8.5 26 23 76 22 08 32 458
D206160.TD1401P 159 57 40.5 40 22 35 34 8.5 26 23 76 22 14 32 450
D206160.TD2001P 159 57 40.5 40 22 35 34 8.5 26 23 76 22 20 32 446
D206200.TD0801P 198 61.5 39.5 51 17.5 44 33 7.5 26 23 76 22 (*) 08 32 700
D206200.TD1601P 198 61.5 39.5 51 17.5 44 33 7.5 26 23 76 22 (*) 16 32 690
D206200.TD2001P 198 61.5 39.5 51 17.5 44 33 7.5 26 23 76 22 (*) 20 32 685
D206250.TD0801P 252 70 47 55.5 24 46 39 11 24 25 86 28 (*) 08 36 1030
D206250.TD2001P 252 70 47 55.5 24 46 39 11 24 25 86 28 (*) 20 36 1015
D206350.TD0801P 346 80 49.5 67.5 24 56 43.5 17.5 35 25 86 30 (*)(+) 08 32 1640

Attention: For a minimum of 50 pieces the diameter d1 can be customised (hole tolerance H10 galvanised and H7 black-oxide treated).
Dm = Maximum obtainable diameter for subsequent machining (widening).

Request informations

Contact Form

Find our nearest distributor

Click here