16

P544

Complete steel feet with fixing-ball joint stud +anti-slip pad

FULL STEEL MOUNTING FOOT WITH ARTICULATED STEM TYPE A - BALL 24 AND NON-SLIP BASE

Ver. 16V01-0124

P544:
Turned free-cutting steel mounting foot base.

Smooth.

  • Technical features

    Materials:
    P544:
    Turned free-cutting steel mounting foot base.
    P544CIN:
    Turned stainless steel mounting foot base (Aisi 303).

    Surface finish:
    Smooth.

    Colour:
    P544:
    Standard blue galvanising.
    P544CIN:
    Natural.

    Inserts:
    P544:
    Galvanised steel threaded and articulated stem (ball 24) with hexagonal base (thread tolerance 6g).
    P544CIN:
    Stainless steel threaded and articulated stem (ball 24) with hexagonal base (Aisi 303) (thread tolerance 6g).

    Stem fixing method:
    The stem cannot be disassembled. The ball cannot be removed as the edge of its seat has been pressed in.

    Non-slip base:
    Non-slip base in thermoplastic rubber SBS 75 Shore, black RAL 9011.
    Resistant to oils and greases. Push-fit assembly.

    Special requests:
    Upon request and for special quantities inserts can be supplied with customised lengths.

Alternative products
Version P544: Galvanised steel mounting foot with stem type A (with hexagonal base) and ball 24-with SBS non-slip base
Codice Art. D H H1 H3 E s R d16g Q F1|(kN) 3D
P54460.0011 P54460.VZM16X090 60 20 32 22,5 24 10 24 M16 90 - 60
P54460.0012 P54460.VZM16X110 60 20 32 22,5 24 10 24 M16 110 - 60
P54460.0013 P54460.VZM16X130 60 20 32 22,5 24 10 24 M16 130 - 60
P54460.0014 P54460.VZM16X150 60 20 32 22,5 24 10 24 M16 150 - 60
P54460.0015 P54460.VZM16X170 60 20 32 22,5 24 10 24 M16 170 - 60
P54460.0016 P54460.VZM20X090 60 20 32 22,5 24 10 24 M20 90 - 90
P54460.0017 P54460.VZM20X110 60 20 32 22,5 24 10 24 M20 110 - 90
P54460.0018 P54460.VZM20X130 60 20 32 22,5 24 10 24 M20 130 - 90
P54460.0019 P54460.VZM20X150 60 20 32 22,5 24 10 24 M20 150 - 90
P54460.0020 P54460.VZM20X170 60 20 32 22,5 24 10 24 M20 170 - 90

Attention: The expressed load limit F1 is lower than the break load by 30% and is intended as static.
Customised stud length available for a minimum of 100 pieces.

Codice Art. D H H1 H3 E s R d16g Q F1_(kN) 3D
P54460.0001 P54460.INM16X090CIN 60 20 32 225 24 10 24 M16 90 - 60
P54460.0002 P54460.INM16X110CIN 60 20 32 225 24 10 24 M16 110 - 60
P54460.0003 P54460.INM16X130CIN 60 20 32 225 24 10 24 M16 130 - 60
P54460.0004 P54460.INM16X150CIN 60 20 32 225 24 10 24 M16 150 - 60
P54460.0005 P54460.INM16X170CIN 60 20 32 225 24 10 24 M16 170 - 60
P54460.0006 P54460.INM20X090CIN 60 20 32 22,5 24 10 24 M20 90 - 60
P54460.0007 P54460.INM20X110CIN 60 20 32 22,5 24 10 24 M20 110 - 60
P54460.0008 P54460.INM20X130CIN 60 20 32 22,5 24 10 24 M20 130 - 60
P54460.0009 P54460.INM20X150CIN 60 20 32 22,5 24 10 24 M20 150 - 60
P54460.0010 P54460.INM20X170CIN 60 20 32 22,5 24 10 24 M20 170 - 60

Request informations

Contact Form

Find our nearest distributor

Click here