c

C193

Handwheel with revolving handle

SOLID CONTROL HANDWHEEL WITH REVOLVING HANDLE M145

Ver. CEN.15-0619

Reinforced and stabilized polyamide.
Resistant to oils and greases.

Satin.

  • Technical features

    Materials:
    Reinforced and stabilized polyamide.
    Resistant to oils and greases.

    Surface finish:
    Satin.

    Colour:
    Black (RAL 9011).

    Central cap:
    Grey polyamide (RAL 7035 code 13).

    Alternative cap colours:
    Orange (RAL 2004 cod. 02).
    Blue (RAL 5015 cod. 07).
    Yellow (RAL 1021 cod. 10).
    Red (RAL 3000 cod. 16).
    Green (RAL 6024 cod. 17).
    Black ( RAL 9011 cod. 01).

    Main insert:
    Galvanised steel insert with smooth through bore (tolerance H10).

    Lateral insert:
    Brass insert with threaded through hole.

    Lateral handle:
    Revolving handle art. M145 [pageFAM_M145.

    Fixing method:
    For fixing systems, or execution of keyways or square holes, please refer to the technical notes attached to the catalogue [pageFAM_NT10-Codice.

    Special requests:
    On request and with a minimum of 50 pieces, the inserts can be supplied with the hole d1 with H7 tolerance and black-oxide finish. Add the letters ZB to the standard code. Example: C193100.TD1001PZB.
    Upon request and for special quantities inserts can be supplied with custom hole diameter d1.
    Upon request and for special quantities inserts can be supplied in different materials/with different coatings.
    Upon request and for special quantities handwheels, handles and caps are available in the colours indicated in the chart (attention: reduced range) [pageTitoloTabellaColori.

  • Certifications

  • Material sheets

Alternative products
Art. D H h d m c d3 h3 dl L Dm d1 H10 Q
C193080.TP0501P 81 33 29 25 16 17 16 9 20 55 12 5 20 135
C193100.TP0501P 100 39 34 30 18.5 20.5 16 10 20 55 16 5 24 220
C193125.TP0501P 125 44 37 36 20 24 26 13 23 66 18 5 24 370
C193150.TD0801P 150 54 44 38 25 29 26 12 25 76 22 8 32 594
C193175.TD0801P 173 57 47 40 25.5 31.5 26 15 25 87 22 8 32 750
C193200.TD0801P 202 59 49 44 24 35 27 13 27 96 28 8 36 965
C193250.TD0801P 249 68 58 59 29 39 36 22 27 96 28 8 36 1500

Attention: For a minimum of 50 pieces the diameter d1 can be customised (hole tolerance H10 galvanised and H7 black-oxide treated).
Dm = Maximum obtainable diameter for subsequent machining (widening).

Request informations

Contact Form

Find our nearest distributor

Click here