DETENT HINGE WITH PRESET POSITIONS AND HOLE COVER CAP
15
O470
Cerniere con frizione/blocco
Materials:
Reinforced polyamide.
Resistant to oils and greases.
Surface finish:
Satin.
Colour:
Black (RAL 9011).
Inserts:
Galvanised steel pin;
Stainless steel thrust and lock springs (Aisi 302);
(1) Pin cap in PA6.
(2) Hole cover cap in reinforced PA6.
Hole:
Through hole obtained by moulding the plastic, for screw M05.
Preset positions:
The springs that act on the pivot pin have three torque calibrations: 0.7 Nm, 1.1 Nm and 1.7 Nm. The preset detent positions are: 80° - 115° - 150°.
Attention: a version of the hinge without springs with free movement to 180° is also available (code O470034.TG5.501).
Special Requests:
None.






Code | art. | I / C | A° | Nm | A | B | H | h | h1 | D | d1 | Weight (g) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
O470034.0001 | O470034.TG5.501 | 34 | 180° | - | 57 | 51 | 18 | 10,5 | 9 | 10,5 | 5,5 | 43 |
O47034.0001 | O47034.T080G5.501N0.7 | 34 | 80° | 0,7 | 57 | 51 | 18 | 10,5 | 9 | 10,5 | 5,5 | 43 |
O47034.0002 | O47034.T080G5.501N1.1 | 34 | 80° | 1.1 | 57 | 51 | 18 | 10,5 | 9 | 10,5 | 5,5 | 43 |
O47034.0003 | O47034.T080G5.501N1.7 | 34 | 80° | 1,7 | 57 | 51 | 18 | 10,5 | 9 | 10,5 | 5,5 | 43 |
O47034.0004 | O47034.T115G5.501N0.7 | 34 | 115° | 0,7 | 57 | 51 | 18 | 10,5 | 9 | 10,5 | 5,5 | 43 |
O47034.0005 | O47034.T115G5.501N1.1 | 34 | 115° | 1,1 | 57 | 51 | 18 | 10,5 | 9 | 10,5 | 5,5 | 43 |
O47034.0006 | O47034.T115G5.501N1.7 | 34 | 115° | 1,7 | 57 | 51 | 18 | 10,5 | 9 | 10,5 | 5,5 | 43 |
O47034.0007 | O47034.T150G5.501N0.7 | 34 | 150° | 0,7 | 57 | 51 | 18 | 10,5 | 9 | 10,5 | 5,5 | 43 |
O47034.0008 | O47034.T150G5.501N1.1 | 34 | 150° | 1,1 | 57 | 51 | 18 | 10,5 | 9 | 10,5 | 5,5 | 43 |
O47034.0009 | O47034.T150G5.501N1.7 | 34 | 150° | 1,7 | 57 | 51 | 18 | 10,5 | 9 | 10,5 | 5,5 | 43 |