e

E216

Crank handles with smooth bore

CRANK HANDLE WITH SMOOTH INSERT AND REVOLVING HANDLE

Ver. EUK.16-0719

Reinforced polyamide.
Oils and greases resistant.

Satin.

  • Technical features

    Materials:
    Reinforced polyamide.
    Oils and greases resistant.

    Surface:
    Satin.

    Colour:
    Black (RAL 9011).

    Central cap:
    Grey polyamide cap (RAL 7035 cod. 13).

    Alternative cap colour:
    Orange (RAL 2004 cod. 02).
    Red (RAL 3000 cod. 16).
    Blue (RAL 5015 cod. 07).
    Green (RAL 6024 cod. 17).
    Yellow (RAL 1021 cod. 10).
    Black ( RAL 9011 cod. 01).

    Inserts:
    Zinc plated steel insert with right through smooth bore, (bore tolerance H10).

    Lateral insert:
    Brass insert with threaded right through bore.

    Side handle:
    Revolving handle art. M144 [pageFAM_M144.

    SPECIAL REQUESTS:
    It’s possible to supply the inserts with d1 bore by customer design, on request and for quantities.
    It’s possible to supply the inserts in different material and treatment-finishes, on request and for quantities.
    On request and for quantities, it is possible to supply the articles on colours, as shown on colours table page [ pageTitoloTabellaColori.

  • Certifications

Alternative products
Art. L R H D d m c A B h d3 h3 dm d1 H10 Q dl L1
E216065.TP0501 88 65 30 27 22 17 13 18 9.5 8 14 10 12 05  20 20 56 96
E216065.TD1001 88 65 30 27 22 17 13 18 9.5 8 14 10 12 10 20 20 56 92
E216065.TD1201 88 65 30 27 22 17 13 18 9.5 8 14 10 12 12 20 20 56 89
E216080.TP0501 106 80 33 30 26 19 13 21.5 11 9 18 9 14 05  24 20 56 110
E216080.TD1001 106 80 33 30 26 19 13 21.5 11 9 18 9 14 10 24 20 56 105
E216080.TD1201 106 80 33 30 26 19 13 21.5 11 9 18 9 14 12 24 20 56 102
E216110.TD0801 138 110 39 33 29 22 14 22 12 11 18 11 14 05  28 21 66 160
E216110.TD1001 138 110 39 33 29 22 14 22 12 11 18 11 14 10 28 21 66 152
E216110.TD1201 138 110 39 33 29 22 14 22 12 11 18 11 14 12 28 21 66 148
E216140.TD0801 174 140 49 41 35 34 16 25.5 13.5 15 22 19 20 08  30 23 76 250
E216140.TD1201 174 140 49 41 35 34 16 25.5 13.5 15 22 19 20 12 30 23 76 242
E216140.TD1401 174 140 49 41 35 34 16 25.5 13.5 15 22 19 20 14  30 23 76 238
E216140.TD1601 174 140 49 41 35 34 16 25.5 13.5 15 22 19 20 16 30 23 76 232
E216185.TD0801 220 185 55 45 40 40 16.5 26.5 14 16.5 28 21 22 08  34 25 86 430
E216185.TD1201 220 185 55 45 40 40 16.5 26.5 14 16.5 28 21 22 12 34 25 86 400

Attention: With a minimum of 50 pieces the diameter d1 can be produced on request (tolerance hole H10 galvanized or black-oxide H7).
Dm = It’s possible to increase the hole, by boring, until Dm (enlarge).

Request informations

Contact Form

Find our nearest distributor

Click here