d

D454

Handwheels with arms

“EUROMODEL” 4 ARMS CONTROL HANDWHEEL

Ver. DUK.15-0619

Special technopolymer reinforced with high-strength glass fiber.
Oils and greases resistant.

Satin.

  • Technical features

    Materials:
    Special technopolymer reinforced with high-strength glass fiber.
    Oils and greases resistant.

    Surface:
    Satin.

    Colour:
    Black (RAL 9011).

    Central cap:
    Grey polyamide cap (RAL 7035 cod. 13).

    Alternative cap colours:
    Orange (RAL 2004 cod. 02).
    Blue (RAL 5015 cod. 07).
    Yellow (RAL 1021 cod. 10).
    Red (RAL 3000 cod. 16).
    Green (RAL 6024 cod. 17).
    Black ( RAL 9011 cod. 01).

    Main insert:
    Zinc plated steel insert with right through smooth bore, (bore tolerance H10).

    Hub:
    Hollow underneath hub.

    Fixing:
    For fixing system, or execution of keyway or square holes, please refer to the technical notes attached to the catalogue.

    SPECIAL REQUESTS:
    On request and with a minimum of 50 pieces, the inserts can be supplied with the hole d1 with H7 tolerance and black-oxide finish. Add the letters ZB to the standard code. Example: D454310.TD1701PZB.
    It’s possible to supply the inserts with d1 bore by customer design, on request and for quantities.
    It’s possible to supply the inserts with threaded d1 bore, on request and for quantities.
    It’s possible to supply the inserts in different material and treatment-finishes, on request and for quantities.

  • Certifications

Alternative products
Art. D H h d d2 A B h2 h3 h4 d3 Dm d1 H10 Q
D454310.TD0801P 308 66 45.5 83 35.5 45.5 20 3 7.5 46 34 26 08 38 900

Attention: With a minimum of 50 pieces the diameter d1 can be produced on request (tolerance hole H10 galvanized or black-oxide H7).
Dm = It’s possible to increase the hole, by boring, until Dm (enlarge).

Request informations

Contact Form

Find our nearest distributor

Click here