d

D214

Handwheels with arms

3 ARMS CONTROL HANDWHEEL WITH SMOOTH OR THREADED HOLE

Ver. DUK.15-0619

Reinforced and stabilised polyamide.
Oils and greases resistant.

Satin.

  • Technical features

    Materials:
    Reinforced and stabilised polyamide.
    Oils and greases resistant.

    Surface:
    Satin.

    Colour:
    Black (RAL 9011).

    Central cap:
    Grey polyamide cap (RAL 7035 cod. 13).

    Alternative cap colours:
    Orange (RAL 2004 cod. 02).
    Blue (RAL 5015 cod. 07).
    Yellow (RAL 1021 cod. 10).
    Red (RAL 3000 cod. 16).
    Green (RAL 6024 cod. 17).
    Black ( RAL 9011 cod. 01).

    Main insert:
    Version TD:
    Zinc plated steel insert with right through smooth bore, (bore tolerance H10).
    Version TM:
    Zinc plated steel insert with right through threaded bore, (thread tolerance 6H).

    Fixing:
    For fixing system, or execution of keyway or square holes, please refer to the technical notes attached to the catalogue.

    SPECIAL REQUESTS:
    On request and with a minimum of 50 pieces, the inserts can be supplied with the hole d1 with H7 tolerance and black-oxide finish. Add the letters ZB to the standard code. Example: D214140.TD1301PZB.
    It’s possible to supply the inserts with d1 bore by customer design, on request and for quantities.
    It’s possible to supply the products with orange colours , on request and for quantities. (RAL 2004 cod. 02).
    It’s possible to supply the inserts in different material and treatment-finishes, on request and for quantities.

  • Certifications

Alternative products
Versione TD with insert with smooth through bore (tolerance H10)
Art. D H h d m c A h3 d3 Dm d1 H10 Q
D214140.TD0801P 137 45 39.5 38 19 26 22 7.5 26 22 08 32 200
D214140.TD1201P 137 45 39.5 38 19 26 22 7.5 26 22 12 32 196
D214180.TD0801P 177 56 42.5 38 20 35 23 10.5 26 22 08 32 280
D214220.TD0801P 221 61 46 38 22 39 25 14 26 22 08 32 340
D214220.TD1801P 221 61 46 38 22 39 25 14 26 22 18 32 325

Attention: With a minimum of 50 pieces the diameter d1 can be produced on request (tolerance hole H10 galvanized or black-oxide H7).
Dm = It’s possible to increase the hole, by boring, until Dm (enlarge).

Version TM: with right through threaded bore
Art. D H h d m c A h3 d3 d1 6H Q
D214140.TM1201P 137 45 39.5 38 19 26 22 7.5 26 M12 32 197
D214140.TM1601P 137 45 39.5 38 19 26 22 7.5 26 M16 32 193
D214180.TM1601P 177 56 42.5 38 20 35 23 10.5 26 M16 32 275
D214180.TM1801P 177 56 42.5 38 20 35 23 10.5 26 M18 32 270
D214220.TM1401P 221 61 46 38 22 39 25 14 26 M14 32 335
D214220.TM1601P 221 61 46 38 22 39 25 14 26 M16 32 333
D214220.TM1801P 221 61 46 38 22 39 25 14 26 M18 32 330

Attention: bore d1 (H10 tolerance) could be produced by request, with 50 pieces minimum.

Request informations

Contact Form

Find our nearest distributor

Click here