k

K904

Control handwheel with seat for gravity indicator

SOLID CONTROL HANDHEEL WITH REVOLVING AND FOLDING HANDLE AND INDICATOR SEAT

Ver. KUK.20-0719

Reinforced and stabilised polyamide.
Oils and greases resistant.

Satin.

  • Technical features

    Materials:
    Reinforced and stabilised polyamide.
    Oils and greases resistant.

    Surface:
    Satin.

    Colour:
    Black (RAL 9011).

    Inserts:
    Zinc plated steel insert with right through smooth bore, (bore tolerance H10).

    Lateral insert:
    Brass threaded right trough bored insert.

    Side handle:
    Revolving and folding handle article M136.

    Mountable indicator
    Use gravity indicators models K650 or K660. The indicator can only be used in a vertical position (horizontal machine axis). The indicator and its fixing grub screw (d7) are to be purchased separately. For further information on the indicators, see the pages relating to articles K650 and K650.
    (*) With the adapter KS08050.T01 you can mount the indicator K650080.

    Fixing:
    For fixing system, or execution of keyway or square holes, please refer to the technical notes attached to the catalogue.

    SPECIAL REQUESTS:
    On request and with a minimum of 50 pieces, the inserts can be supplied with hole d1 with tolerance H7 and black-oxyde finish. Add the letters ZB to the standard code. Example: K904100.T050D1001PZB.
    It’s possible to supply the inserts with d1 bore by customer design, on request and for quantities.
    It’s possible to supply the inserts in different material and treatment-finishes, on request and for quantities.
    Indicator to be ordered separately.
    Upon request and for quantities the indicator seat can be adjusted.

    Matches diameters / Indicators:
    d5=52,4 --> K650050
    d5=87,4 --> K650080 o K660080

  • Accessories

  • Certifications

Alternative products
art. D H H1 d d2 M C C1 d3 d4 d5 (K650) d6 d7 h h3 h4 h5 h6 dl L Dm d1H10 Q
K904087.T050P5,801P 86 53 77 32 62 21 17 15 20 50.8 52.4 63 M6 26.5 6.5 11.5 12 3 20 56 12 5.8 20 195
K904100.T050P6,801P 99 55.5 80 32 63 23.5 20.5 11.5 20 50.8 52.4 68 M6 29 9 11.5 12 3.5 20 56 12 6.8 20 210
K904130.T080P6,801P 129 64.5 94 42 100 27.5 23 14 29 85.7 87,4* 90 M6 34 10 13.5 12.5 5 25 76 20 6.8 24 420
K904150.T080P6,801P 149 69 104 42 101 31 25.5 12.5 29 85.7 87,4* 106 M6 37 9 13.5 12.5 6.5 26 89 20 6.8 28 580
K904175.T080P6,801P 175 72 107 40 115 28.5 32 11.5 25 85.7 87,4* 126.5 M6 38 10 12.5 14 8 26 89 20 6.8 28 800
K904200.T080P6,801P 199 71 106 46 137 24 32 15 29 123 87,4 144 M6 34 11 13.5 12.5 10 26 97 22 6.8 23 970

Attention: With a minimum of 50 pieces the diameter d1 can be produced on request (tolerance hole H10 galvanized or black-oxide H7).
Dm = It’s possible to increase the hole, by boring, until Dm (enlarge).

Request informations

Contact Form

Find our nearest distributor

Click here